pellet stove gasifier 0001

Duration : 0:3:53


Zoobler.com Closeout - Breckwell Big E pellet stove

Tags: gasifier, pellet, stove
Posted in Pellett Stove

3 Responses to “pellet stove gasifier 0001”

  1. 1035antimony says:
    July 6, 2009 at 10:51 pm

    I think the temp is …
    I think the temp is pretty accurate in the chamber as it is black from the smoke, in the feed tube I added air to create back pressure which would force any burning from getting into the tube, Thank u for ur interest. Mike

  2. Jkirk3279 says:
    July 6, 2009 at 10:51 pm

    I’ve noticed in my …
    I’ve noticed in my own work that laser thermometers don’t do well with shiny surfaces like your heat exchanger.

    I found this out when I was trying to get a temperature read on a shiny metal stovepipe. I kept getting low readings until I tested a spot that still had a paper UPC label on it.

    The cure is to brush some soot or even a black sharpie on the surface first.

    I’m curious how you handled the pellet feed problem: keeping the pellets from igniting in the tube is tricky.

  3. Koerperklaus3000 says:
    July 6, 2009 at 10:51 pm

    Are there any new …
    Are there any new developements for 2009?

Leave a Reply